Sangfor Community»Categories Products Internet Access Gateway (IAG) IAG WEB UI

IAG WEB UI

views: 3723 | comments: 5 | added to Favorites 0
Lights on | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
Created: 20 Mar 2023 12:55

Summary:

How to assign WEB UI to other Interface in IAG? For Example:These are my Interfaces and currently, I can login to the WEB UI using default eth0 -10.251.251.251

Reply

Faisal Piliang Posted 23 Mar 2023 17:34
After finishing all the wiring, you can then log into the Web User Interface (UI) to configure the. SANGFOR IAM device.
Jhazz Posted 21 Mar 2023 09:33
You can enabled it thru the "Remote Tech Support" under General and Advance tab
rivsy Posted 21 Mar 2023 09:18
You can set it in the WAN interface
Johnbada Posted 20 Mar 2023 18:54
Hope we have the same version IAG firmware.

since the ETH2 is sign as zone WAN then you can do the following step:

1. Goto  System >> General >> Advance
2. Select option Remote Tech Support the enable the Enable admin access via WAN interface

sample picture as below:

hope this can solved your problem.
SassyScorpio Posted 20 Mar 2023 13:05
IAG, or Intelligent Application Gateway, is a Microsoft product that provides secure remote access to corporate resources. Assigning a web UI to another interface in IAG can be done through the following steps:
  • Open the IAG Management Console.
  • Navigate to the "Configuration" tab.
  • Select the "Network" option from the left-hand menu.
  • Click on the interface you want to assign the web UI to.
  • Under the "HTTP(S) Server" section, click on the "Change Settings" button.
  • In the "Server Configuration" dialog box, select the "Use a custom web site" option.
  • Enter the IP address and port number of the web server you want to use for the web UI.
  • Click on the "OK" button to save the changes.


Once you have completed these steps, the web UI will be accessible through the IP address and port number you specified.