Sangfor Community»Categories Products Network Secure (NGAF) Inter-vlan

Inter-vlan

views: 5409 | comments: 16 | added to Favorites 0
Lights on | 提示:支持键盘翻页<-左 右->
    组图打开中,请稍候......
Created: 03 May 2023 08:51

Summary:

   Hello There, Please verify that the policy in my setups that VLAN1 to VLAN10 will have an inter-vlan is correct. thanks you,

Reply

CLELUQMAN Posted 09 May 2023 09:09
its look OK. but have u tried it? u may also need to configure vlan inside the network switch also
Gomu Posted 09 May 2023 08:41
You may also want to consult the documentation for your network devices and seek assistance from your IT team or a network specialist if necessary.
Franky Posted 09 May 2023 08:28
It must be check the connectivity
eram Posted 09 May 2023 07:05
Yes, your policy in setups in which the VLAN1 to VLAN10 will have an inter-vlan is correct
Pat Posted 09 May 2023 06:53
That is correct but make sure to test the connectivity using UDP or TCP traffic
Imran Tahir Posted 08 May 2023 21:53
Yes that is fine
Zonger Posted 08 May 2023 18:15
Verify that VLANs are correctly configured on your network switches and routers.

Check that the correct IP addresses and subnet masks are assigned to each VLAN interface.

Verify that VLAN tagging is properly configured on your network switches and routers.

Ping devices on different VLANs to confirm that they can communicate with each other.

Test connectivity using different types of traffic (e.g., TCP, UDP) to ensure that all necessary protocols are allowed to pass between VLANs.

If any issues are found during testing, you may need to troubleshoot the network configuration further to resolve the problem. You may also want to consult the documentation for your network devices and seek assistance from your IT team or a network specialist if necessary.
Yboom Posted 08 May 2023 17:42
Find the VLAN settings: Go to the area or menu where you may configure VLAN-specific policies or rules.
Donsadam Posted 08 May 2023 17:39
To guarantee that all relevant protocols may travel between VLANs, test connection using different types of traffic (e.g., TCP, UDP).
CptArmando Posted 08 May 2023 17:32
Ping devices on various VLANs to ensure that they can interact with one another.

To guarantee that all relevant protocols may travel between VLANs, test connection using different types of traffic (e.g., TCP, UDP).
Farina Ahmed Posted 08 May 2023 13:53
To verify that inter-VLAN communication is working as intended, you can perform some tests such as:

Verify that VLANs are correctly configured on your network switches and routers.

Check that the correct IP addresses and subnet masks are assigned to each VLAN interface.

Verify that VLAN tagging is properly configured on your network switches and routers.

Ping devices on different VLANs to confirm that they can communicate with each other.

Test connectivity using different types of traffic (e.g., TCP, UDP) to ensure that all necessary protocols are allowed to pass between VLANs.

If any issues are found during testing, you may need to troubleshoot the network configuration further to resolve the problem. You may also want to consult the documentation for your network devices and seek assistance from your IT team or a network specialist if necessary.