NSF 8.0.95 Reverse Routing

firdaus9090 Lv1Posted 2024-Nov-26 17:10

hi community,

Our firewall are connected to two router that goes to different ISP

Is the reverse routing is recommended to be enable here on both interface connected to the router?
thanks

This topic contains more resources

You must log in to download or view the file. Not registered yet? Register

x

Newbie517762 has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Last edited by Newbie517762 2024-Nov-26 17:33.

HiHi,

The 'Reverse Routing' setting is used to manage the return path of network traffic. This setting ensures that the response packets follow the same path as the incoming packets.

In practical terms, enabling Reverse Routing helps in scenarios where multiple ISPs are involved, ensuring that the traffic is routed back through the same interface it arrived on.

Below is the NSF User Manual Description:
Reverse Routing: Specify whether data packets are sent out through the same link they come in. You need to enable this option when there are WAN links of multiple ISPs; otherwise, the service may be inaccessible. This option is automatically enabled once WAN attribute is checked.
Is this answer helpful?
Enrico Vanzetto Lv4Posted 2024-Nov-26 17:24
  
Hi, Sangfor's reverse routing is useful if you need to set up rules to manage how traffic is routed back to the internal network from external sources. If you don't need to make static routes and policies to manage how traffic is routed back to the internal network from external networks, you can leave this option unticked.
Newbie517762 Lv5Posted 2024-Nov-26 17:28
  
Last edited by Newbie517762 2024-Nov-26 17:33.

HiHi,

The 'Reverse Routing' setting is used to manage the return path of network traffic. This setting ensures that the response packets follow the same path as the incoming packets.

In practical terms, enabling Reverse Routing helps in scenarios where multiple ISPs are involved, ensuring that the traffic is routed back through the same interface it arrived on.

Below is the NSF User Manual Description:
Reverse Routing: Specify whether data packets are sent out through the same link they come in. You need to enable this option when there are WAN links of multiple ISPs; otherwise, the service may be inaccessible. This option is automatically enabled once WAN attribute is checked.
Farina Ahmed Lv5Posted 2024-Nov-28 13:44
  
Enabling reverse routing on both interfaces connected to the routers is generally recommended to ensure proper routing of return traffic. It helps prevent asymmetric routing issues and ensures that response packets follow the correct path back to the source.
Zonger Lv5Posted 2024-Nov-28 19:12
  
Reverse Routing (also known as Source Routing or Policy-Based Routing) is used to ensure that traffic coming from one interface will follow the same path when returning, i.e the outgoing and incoming traffic flows over the same route.

I Can Help:

Change

Moderator on This Board

11
8
5

Started Topics

Followers

Follow

1
3
5

Started Topics

Followers

Follow

0
4
5

Started Topics

Followers

Follow

67
20
3

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

1
138
3

Started Topics

Followers

Follow

Board Leaders