grayice499 Lv2Posted 2022-Oct-20 16:59
  
there must be an iphelper element in the network topology
nobitachou Lv2Posted 2022-Oct-21 11:01
  
Create a sub interface in each vlans
soneosansan Lv3Posted 2022-Oct-21 11:05
  
If a dhcp server vlan crosses a dhcp client vlan border, the network topology must include an iphelper element.
LucyHeart Lv3Posted 2022-Oct-21 11:08
  
there must be an iphelper element in the network topology
Jigen87 Lv3Posted 2022-Oct-21 11:12
  
Configure DHCP pool first
Fuji12 Lv3Posted 2022-Oct-21 11:15
  
set ip address and set vlan number. -- > Go to DHCP settings, select corresponding sub-interfaces, and set DHCP configurations like gateway ip, dhcp ip range
MISMIS Lv3Posted 2022-Oct-21 11:19
  
Should you check the routing and the gateway addresses
MISMIS Lv3Posted 2022-Oct-21 11:19
  
should you check the routing and the gateway addresses
MISMDS Lv3Posted 2022-Oct-21 11:27
  
Routing is the root cause
Jdc Lv2Posted 2022-Oct-25 11:52
  

No as long as you give them different IP address and avoid conflict IP

I Can Help:

Change

Moderator on This Board

1
3
5

Started Topics

Followers

Follow

Board Leaders