MISMIS Lv3Posted 20 Mar 2023 13:34
  
1. Login to the Sangfor IAG web console.

2. Go to the “Settings” tab and select “Authentication”.

3. Select “CAS” from the Authentication Type drop-down menu.

4. Enter the CAS Server URL and the Login URL.

5. Select “Enable CAS session sharing”.

6. Click “Save”.

7. Go to the “Settings” tab and select “Security”.

8. Select “Enable authentication session sharing”.

9. Click “Save”.
faysalji Lv3Posted 20 Mar 2023 13:52
  
Last edited by faysalji 20 Mar 2023 15:09.

To setup Sangfor IAG as a CAS Server and enable it to share session info with all of its clients, follow the following steps:

1. Login to the Sangfor IAG web console.
2. Go to the “Settings” tab and select “Authentication”.
3. Select “CAS” from the Authentication Type drop-down menu.
4. Enter the CAS Server URL and the Login URL.
5. Select “Enable CAS session sharing”.
6. Click “Save”.
7. Go to the “Settings” tab and select “Security”.
8. Select “Enable authentication session sharing”.
9. Click “Save”.

Thanks
Adonis001 Lv3Posted 20 Mar 2023 14:58
  
1. Login to the Sangfor IAG web console.
2. Go to the “Settings” tab and select “Authentication”.
3. Select “CAS” from the Authentication Type drop-down menu.
4. Enter the CAS Server URL and the Login URL.
5. Select “Enable CAS session sharing”.
6. Click “Save”.
7. Go to the “Settings” tab and select “Security”.
8. Select “Enable authentication session sharing”.
9. Click “Save
Farina Ahmed Lv5Posted 20 Mar 2023 15:18
  
Tech.Support@sangfor.com <Tech.Support@sangfor.com>;

Capture.JPG (49.64 KB, Downloads: 529)

Capture.JPG
isabelita Lv3Posted 20 Mar 2023 16:46
  
Login to the Sangfor IAG web console.
Go to the “Settings” tab and select “Authentication”.
Select “CAS” from the Authentication Type drop-down menu.
Enter the CAS Server URL and the Login URL.
Select “Enable CAS session sharing”.
Click “Save”
BitCloud Lv3Posted 20 Mar 2023 17:06
  

Login to the Sangfor IAG web console.
Go to the “Settings” tab and select “Authentication”.
Select “CAS” from the Authentication Type drop-down menu.
Enter the CAS Server URL and the Login URL.
Select “Enable CAS session sharing”.
Taha Lv2Posted 22 Mar 2023 17:54
  
contact snagfor support team for the guidance
Faisal Piliang Posted 23 Mar 2023 17:39
  
Configure the primary Sangfor IAM device as the CAS server, and configure the secondary Sangfor IAM devices as CAS clients

I Can Help:

Change

Moderator on This Board

1
3
5

Started Topics

Followers

Follow

Board Leaders