Sangfor HCI aSAN Networking

MikeMatrido Lv1Posted 24 Sep 2018 17:35

Is it possible if you can increase the number of ports that we can use for aSAN? at least from 2 to 4 per Node? Thank you

Feel alike? Bump to help this suggestion accepted by developers.

An accepted suggestion earns you 100 to 1000 coins. For more active members in Suggestions board, a badge Product Consultant may be rewarded. What is Coin?

Enter your mobile phone number and company name for better service. Go

Ramona Mandhana Lv1Posted 25 Sep 2018 01:30
  
is you mean Storage interface port?
Ramona Mandhana Lv1Posted 01 Oct 2018 12:56
  
actually we need minimally 4 ports,
1. for Management interface
2. for vxLAN / over lay interface
3. for Storage interface
4. for Edge

highly recommend use 10Gbe port for vxLAN and Storage interface

if you want use aggregation link, so you has to have more than 4 ports. what I do before I always set aggregation link for storage interface, and both of them using 10 gbe port
MikeMatrido Lv1Posted 18 Oct 2018 13:31
  
Hi Ramona, thank you very much on this. We already set it up with aggregation using 10Gbe for the Storage Interface.
Faisal Posted 05 Sep 2021 12:44
  
Thank you very much for the information ...