HI , I'm new to the sangfor my current version : AF 8.0.7R2 ,
My customer said that the SSL didnt work ,So I'm checked all the option
in the SSL  and dind found anythings out yet  . .  .  so i'm asking that  a step
to check the ssl vpn connection and make it work again ?

one point : i just look into the SSLVPN>Login Options  and the WebAgent Settings said that my public
203.147.5.xx status Disconnected  >> what does this mean ??

By solving this question, you may help 184 user(s).

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Johnbada Lv2Posted 2022-Aug-19 12:56
  
Please check following
1. Check the internet connection
2. Did you change the SSL-VPN port? Please check what is your SSL-VPN from menu SSLVPN >> Login Option >> HTTPS Port (default is 4430).
3. Make sure SSL-VPN port was not blocked
Imran Tahir Lv4Posted 2022-Jul-20 13:22
  
Just Check the Internet connection
Farina Ahmed Lv5Posted 2022-Jul-19 14:00
  
Make sure the region is not blacklisted in FW.
rivsy Lv5Posted 2022-Jul-19 13:10
  
Please check if properly configure and check the physical connection
Rhebie Lv3Posted 2022-Jul-19 10:06
  
Please check the following:
1. Be sure that you have an internet connection
2. Input the correct IP address of the agent and credentials
3. Check your policy.
4. Restart your device and try to login again.
Pat Lv4Posted 2022-Jul-19 08:30
  
There is something that make you disconnect to the internet. Check Internet Settings and connectivity to Web Agent.
Osama Muhammad Lv3Posted 2022-Jul-19 00:00
  
Check Firewall Webagent first, than look at policy that you have created.
naomivillamor Posted 2022-Jul-18 17:20
  
Disconnect to internet and then reconnect again to reset the connection.
nO_iDea Lv5Posted 2022-Jul-18 13:20
  
The status "disconnected" means that there is no connection from Web agent to the Sangfor device vice versa. Check the following for troubleshooting:

1. Check the device with Web agent if it has the correct IP and has connection to the Internet
2. Check the Firewall that the Web agent is connected, maybe it has policy that blocks the connection.
3. Check if you have proxy setup that blocks also the connection.
4. Restart the device.
Noviyanto Lv3Posted 2022-Jul-18 11:11
  
First check the internet connection whether it is connected or not

I Can Help:

Change

Board Leaders