Packets losted

Vittore Zen Lv1Posted 2022-Aug-02 19:37

After upgrading to 6.7.0_SP2_EN all VM with MS windows in the Italian language reports memory and disk at 100% (even disk is empty) and lose a bunch of packets.
We need a patch urgently.

Vz


arjay has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Kindly consult first with Sangfor Team to check before upgrading to the new firmware version. And as for your current issue, kindly revert it back to the previous version.
Is this answer helpful?
Vittore Zen Lv1Posted 2022-Aug-23 21:59
  
Hi.
Problems solved.
It was two different problems.
First. 100% memory in Microsoft windows with the Italian language is a bug. Sangfor support teams said that will be patched in the next minor release (eta September 2022). They said that it is a GUI problem and this does not affect performance and stability.
Second. Packets lost. HCI version 6.7 has changed the mode that manages LACP in edge and overlay networks, so this (may) affects physical switches configuration. In our scenario (Netgear LACP) change from dynamical to static LACP resolves the problems.

Thanks a lot to Sangfor support.
VZ
Faisal P Posted 2022-Aug-10 11:24
  
Microsoft thought the vulnerability critical enough that an emergency patch was issued for Windows 7 which was no longer supported after January 2020
Osama Muhammad Lv3Posted 2022-Aug-09 18:59
  
Downgrade it and check, if not check disk iops also
Dohan4U Lv2Posted 2022-Aug-09 11:49
  
Try to restart the device and see if problem exist or downgrade firmware 1 version down
RegiBoy Lv5Posted 2022-Aug-09 10:07
  
It is normal, It is still updating that is why you disk are in 100%. Just a little patience.
JamesMee Lv2Posted 2022-Aug-09 09:07
  
Try to downgrade your firmware version if problem still persist
rivsy Lv5Posted 2022-Aug-09 09:00
  
If you have the backup of the previous config just reupload it to retain the previous setting
Pat Lv4Posted 2022-Aug-09 08:30
  
Checking the previous version of the firmware will resolve the issue.
jetjetd Lv5Posted 2022-Aug-08 23:22
  
I'm assuming you had your backup before you upgrade your firmware. You need to restore using your previous version because of your issue. If your old firmware is running smoothly with no issue, I think there is no need to upgrade your firmware.

I Can Help:

Change

Moderator on This Board

2
1
0

Started Topics

Followers

Follow

11
7
5

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

2
2
0

Started Topics

Followers

Follow

Board Leaders