IAM Vlan interfaces with Cisco Switch

syedjahanzaib Lv1Posted 2022-Nov-30 17:17

I want to connect IAM with my existing cisco switch which have different vlans for users. should I configure switch port role to  TRUNK which is connected with IAM, & where to add sub-interfaces in IAM? or whats they way forward?

Sami has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Dear Jahahzaib,

I want to connect IAM with my existing cisco switch which have different vlans for users. should I configure switch port role to  TRUNK which is connected with IAM, & where to add sub-interfaces in IAM? or whats they way forward?

Below is the format for LAN side Trunk,
VLAN TAG NO/IP_ADRR/SUBNET_MASK
E.g: 20/192.168.20.1/255.255.255.0

I hope it helps.
Is this answer helpful?
LucyHeart Lv3Posted 2022-Dec-05 09:41
  
Yes that must be a trunk port
syedjahanzaib Lv1Posted 2022-Dec-01 14:06
  
Last edited by syedjahanzaib 01 Dec 2022 14:11.

I managed to sort it. Problem was that I was not adding the appropriate VLAN sub interface along with its IP in IAM. The trick was to add VALN like this
Goto System > Network / Deployment  / Settings > & under LAN interface Page.
  
10/10.10.10.3/255.255.255.0   


whereas 10/ is the cisco VLAN number, and then the IP of this sub interface & subnet
Maqsood9090 Lv1Posted 2022-Dec-01 12:11
  
very nice post
Happpy Lv3Posted 2022-Dec-01 09:13
  
Please contact support team
LucyHeart Lv3Posted 2022-Dec-01 08:56
  
If your IAM is your new routing device, you should reconfigure all including re addressing
rivsy Lv5Posted 2022-Dec-01 08:14
  
Just make a "Trunk port" in the CISCO switch then configure the IP of both CISCO and IAM
MISMDS Lv3Posted 2022-Nov-30 23:15
  
Yes you should configure a trunk port going to IAM
jetjetd Lv5Posted 2022-Nov-30 22:05
  
Try to add some policy from IAM's network going to VLANs and vice versa and see if it will works.

I Can Help:

Change

Moderator on This Board

1
3
6

Started Topics

Followers

Follow

Board Leaders