how to add a new branch for vpn on bbc 10

how to add a new branch for vpn on bbc

Contact support for more details and information regarding your issues

Specify the routing settings for the new branch. Define which subnets are accessible through the VPN and how traffic should be routed between the branches.

1. Get to the Console:

Go to the IP address or hostname of your Sangfor VPN console by opening a web browser.
Enter your administrator login information to log in.

2. Where is the VPN configuration?

Locate the section that deals with setting up a VPN. Search for phrases such as "Remote Access VPN," "Branch Office VPN," or "Site-to-Site VPN."

3. Start the Creation of a Branch:

Search for a "Add Branch," "Create New Branch," or comparable button or link.
To begin the process of creating a branch, click on it.

4. Give Branch Specific Details:

Input the necessary information for the new branch, usually:
Branch Name: An easy-to-remember name that is descriptive.
Public IP Address: The public IP address of the branch.
A robust, shared secret for authentication is the pre-shared key.

Choose the VPN protocols and settings for the new branch. Common protocols include OpenVPN, IPsec, PPTP, or L2TP. Adjust encryption settings and other parameters based on your security requirements.

On Sangfor's Browser-Based Console (BBC), you would normally log in and go to the VPN settings section in order to create a new branch for VPN. There need to be a way to add a new branch or site in the VPN settings.

Access VPN Management Interface:

Log in to the management interface of your VPN device or server. This could be a hardware VPN device, VPN server software, or a cloud-based VPN service.
Add a New Branch:

Look for an option to add a new branch or site. This is typically found in the VPN configuration settings.
Configure Branch Details:

Provide the necessary information for the new branch. This may include the branch's name, IP address, authentication details, and any other required parameters.

First, choose the WAN interface.
2 Choose VPN subnets and Wan Lines in the Basic configuration.
3. Add VPN users in Local Users and the second Headquarters
4 Add the user name "second HQ" to the VPN connection.

SANGFOR SSL VPN provides remote user with extraordinary access performance and experience by embedding acceleration technologies without additional license fee

1. Access the Console:

    Open a web browser and navigate to the IP address or hostname of your Sangfor VPN console.
    Log in using your administrator credentials.

2. Locate VPN Configuration:

    Find the section dedicated to VPN configuration. Look for terms like "Branch Office VPN," "Site-to-Site VPN," or "Remote Access VPN."

3. Initiate Branch Creation:

    Look for a button or link labeled "Add Branch," "Create New Branch," or similar.
    Click it to start the branch creation process.

4. Provide Branch Information:

    Enter the required details for the new branch, typically:
        Branch Name: A descriptive name for easy identification.
        Public IP Address: The branch's public IP address.
        Pre-Shared Key: A strong, shared secret for authentication.
        Local Network Subnets: The IP ranges of the branch's local networks that will be accessible through the VPN.

5. Configure Additional Settings (if applicable):

    Encryption: Select desired encryption algorithms (e.g., AES-256).
    Authentication: Choose authentication methods (e.g., pre-shared key, certificates).
    Routing: Configure routing options for traffic between branches.
    Bandwidth Management: Set up bandwidth controls or restrictions if needed.

6. Save and Apply Changes:

    Review all settings carefully.
    Save the configuration and apply the changes to activate the new branch.

7. Test Connectivity:

    Verify VPN connectivity between the new branch and other sites by attempting to access resources across the VPN.
    Use tools like ping or traceroute to test connections.

Hi, to add a new branch to an existing VPN on Sangfor, you can follow the steps below:

1) Go to Network > IPsecVPN > VPN Connections.
2) Click on Add to add a new connection.
3) A new window will appear. Fill in the name, HQ primary agent, username, and password that you just created.
4) Click on Save and then click on OK to save the configuration .