#Configuration# DNAT Configuration on Sangfor NGAF V8.0.47 for PRTG Admin Server
  

Sangfor Jojo Lv5Posted 12 Apr 2024 15:31


*Product: NGAF
*Version:8.0.47
*1. Introduction
*1.1 Scenario

In this case study, we tried to write a DNAT configuration on a PRTG Admin network monitoring server. Where the configuration is carried out inside the Sangfor NGAF. Utilizing DNAT is certainly very helpful for admins to manage PRTG servers. The test was carried out using a laptop to open access to PTG servers from outside which are connected to the internet. By typing Public IP into the browser. The result is that the PRTG admin server can real-time send notifications to the client browser on the laptop. As for monitoring incoming and outgoing DNAT traffic, it can be seen from the number of counts in Sangfor NGAF. For the steps to make it, we use the following method.

If you are interested in reading further, you can download the attachment. For a better reading experience, we suggest you download the PDF file in the attachment.


This article is written by @Medic who is a technical engineer in the network security field. If you want to know more about him, click here.



If you want to share articles like troubleshooting cases or configuration guides and get paid 4000 coins, please click the link below to register for this event.

1_Configurate DNAT in Sangfor NGAF for Server Prtg Admin_EN_Medi.pdf

1.41 MB, Downloads: 413

Like this topic? Like it or reward the author.

Creating a topic earns you 5 coins. A featured or excellent topic earns you more coins. What is Coin?

Enter your mobile phone number and company name for better service. Go

Prosi Lv3Posted 13 Apr 2024 10:05
  
Thank you for the information
Newbie517762 Lv5Posted 15 Apr 2024 09:00
  
Thank you for sharing.
Newbie290036 Posted 18 Apr 2024 22:51
  
Thanks for the information.
Sheikh_Shani Lv2Posted 26 Jul 2024 02:27
  
Thanks for sharing