HCI OS Install on software raid 1

Hunters Lv1Posted 20 Jan 2020 18:01

Hi to all,
we'd like to know if there is a way to install the HCI OS in a redundant way that do not require a Hardware RAID controller. For example using 2 HDD in software raid built directly from Sangfor. We are configuring a new cluster (using 6.0 version) on 4 DELL R620 servers that have only PERC S110 raid controller (software raid) that is not recognized from the Sangfor Linux OS (it still see single disks even if the RAID1 is built on the controller). So we'd like to remove the RAID1 from the S110 controller and use disks as non raid (if there is no way to let Sangfor Linux OS to see the S110 Software RAID1) and install the HCI in a self redundant way with Linux software RAID1. This is quite important so we will not loose the node in case of OS disk failure.
Or if there is a quick OS disk replacement system inside HCI to quick restore a node with all its configurations in case of OS disk failure.
Thank you
Regards
Marcello

Apriyanto has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

you must have raid controller (hardware) , not software only.
Is this answer helpful?
Apriyanto Lv5Posted 20 Jan 2020 18:46
  
you must have raid controller (hardware) , not software only.
chalid112 Lv1Posted 23 Jan 2020 10:02
  
Fyi, if you want install software HCI, you must be have controller to, 2 OS cant running on same controller.
Kindly read this for details  :
https://www.sangfor.com/Uploads/ ... Manual_20180324.pdf

I Can Help:

Change

Moderator on This Board

2
1
0

Started Topics

Followers

Follow

11
7
5

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

2
2
0

Started Topics

Followers

Follow

Board Leaders