Can the Sangfor WANO identify every hops or router it passes through and identify paths that have more latency?

CTI_JianJie has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins, 10 coins of bounty and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

Sangfor WANO is able to detect hops or routers it passes through but WANO does not use this to determine the latency. You can achieve the best path selection with the Policy-based route setting, you can set the good latency, jitter, and performance line as the first top priority for the routing.
Is this answer helpful?
rivsy Lv5Posted 2022-Nov-27 15:49
  
Yes it can and it is only available in bridge mode only
Newbie308427 Posted 2022-Nov-27 21:52
  
It depends on a particular router(s) settings
Zonger Lv5Posted 2022-Nov-28 04:06
  
Sangfor WANO is a powerful Wide Area Network (WAN) Optimization solution. WANO provides one-step connectivity and optimization and LAN speeds on your WAN.
RegiBoy Lv5Posted 2022-Nov-28 08:56
  
Yes, it has the features of identifying the everyhop and can check the route that have much latency so you can rest assured that you have lower latency because of this.
Naomi Posted 2022-Nov-28 10:45
  
Yes it is available on bridge mode
Rhebie Lv3Posted 2022-Nov-28 10:50
  
Yes, and it is only available in bridge mode.
NeTSec Lv3Posted 2022-Nov-28 10:50
  
Yes and it has good dashboard so can see the full visibility of the paths
Noah19 Lv3Posted 2022-Nov-28 10:55
  
It is not only in bridge mode but also in routed mode
Rashley Lv2Posted 2022-Nov-28 10:58
  
It is in routed mode as well as bridge mode.

I Can Help:

Change

Board Leaders