EHern Lv3Posted 2024-Nov-18 15:29
  
EasyConnect is a VPN secure access platform that allows users to access applications across platforms in real-time,  Open an IE browser and enter the SSL VPN address
Enter the SSL VPN account created in the SSL VPN Server configuration
Click Start > Programs > SSL VPN Client > Start VPN
Enter the VPN address and click Connect
NewbieC Lv3Posted 2024-Nov-18 15:32
  
EasyConnect is a VPN secure access platform that allows users to access applications across platforms in real-time,  Open an IE browser and enter the SSL VPN address
Enter the SSL VPN account created in the SSL VPN Server configuration
Click Start > Programs > SSL VPN Client > Start VPN
Enter the VPN address and click Connect
Denz Lv3Posted 2024-Nov-18 15:33
  
EasyConnect is a VPN secure access platform that allows users to access applications across platforms in real-time,  Open an IE browser and enter the SSL VPN address
Enter the SSL VPN account created in the SSL VPN Server configuration
Click Start > Programs > SSL VPN Client > Start VPN
Enter the VPN address and click Connect
ND Lv3Posted 2024-Nov-18 15:54
  
Last edited by ND 18 Nov 2024 16:11.

To install and configure EasyConnect on a Red Hat-based Linux system (such as Red Hat Enterprise Linux or CentOS), you can follow these general steps:

Download EasyConnect: First, download the EasyConnect client from the SSLVPN page of your firewall or VPN provider. Make sure you choose the appropriate version for Linux. The file may be in a compressed format like .tar.gz or .rpm.

Install Dependencies:
Ensure that your system has the required dependencies installed. These dependencies may include libraries and packages needed for EasyConnect to function properly. You can often find this information on the SSLVPN page or in the documentation provided by your VPN provider.

Install EasyConnect:

If the EasyConnect client is provided as an RPM package (e.g., easyconnect.rpm), you can install it using the following command:

sudo rpm -ivh easyconnect.rpm
If the EasyConnect client is provided as a tarball (e.g., easyconnect.tar.gz), you can extract it and install it manually:

tar -xzvf easyconnect.tar.gz
cd easyconnect
sudo ./install.sh
Follow the installation instructions provided by your VPN provider.

Launch EasyConnect:
After successful installation, you can launch EasyConnect either from the terminal or through your desktop environment's application launcher. The exact command to start EasyConnect may vary depending on how it was installed.

Configure EasyConnect:
Once EasyConnect is running, you'll typically need to configure it with your VPN server details. This includes the server address, your username, and any other required authentication information. Refer to your VPN provider's documentation for guidance on configuring EasyConnect.

Connect to the VPN:
After configuring EasyConnect, you can initiate a connection to your VPN server. This may involve clicking a "Connect" button within the EasyConnect client and entering any necessary credentials.

Verify the Connection:
After connecting, verify that your VPN connection is working by checking your IP address, accessing network resources, or running network diagnostic tests.

Disconnect and Exit:
When you're done using the VPN, make sure to disconnect from the VPN server and exit the EasyConnect client.

Automate Startup (Optional):
If you want EasyConnect to start automatically when you boot your system, you can add it to your startup applications. The method for doing this varies depending on your desktop environment.

Please note that the specific steps and commands may vary depending on the version of EasyConnect and the configuration of your VPN server. Always refer to the documentation provided by your VPN provider for the most accurate and up-to-date installation and configuration instructions. Additionally, ensure that you have the necessary permissions (usually root or sudo) to install software and configure network settings on your Linux system.
Ted3 Lv2Posted 2024-Nov-18 16:06
  
access the public IP of the firewall and using the default SSL service port which is 4430 to download the easy connect client
ArsalanAli Lv3Posted 2024-Nov-18 16:07
  
There is a client easy connect for linux machines

as shown in pic

sangfor.png (44.9 KB, Downloads: 31)

sangfor.png
ArsalanAli Lv3Posted 2024-Nov-18 16:18
  
once you go to the url of SSL VPN server  it give you the prompt to download the client
CLELUQMAN Lv4Posted 2024-Nov-18 16:27
  
no support for CentOS
Dwi Nur Lv2Posted 2024-Nov-18 20:39
  
  • Go to the Sangfor website and navigate to the EasyConnect download page.
  • Select the Linux version from the list of available operating systems.
  • Click on the "Download" button to download the EasyConnect package for Linux.
  • Once the download is complete, extract the contents of the downloaded package to a directory of your choice.
  • Open a terminal and navigate to the directory where the package was extracted.
  • Run the installation script by typing the following command:





  • Follow the on-screen instructions to complete the installation process.



Once the installation is complete, you can launch EasyConnect from the Applications menu or by running the command "easyconnect" in the terminal.
Zonger Lv5Posted 2024-Nov-18 21:20
  
Here are the steps to access Easy Connect on CentOS:

Install Easy Connect Client: Ensure the Easy Connect client (e.g., Oracle Easy Connect) is installed on your system, either via package manager or by downloading from the vendor’s website.

Set Environment Variables: Configure any required environment variables like ORACLE_HOME or TNS_ADMIN.

Open Terminal: Launch a terminal window on your CentOS system.

Use Easy Connect Syntax: Use the appropriate command (e.g., sqlplus) with the Easy Connect syntax: sqlplus username/password@hostname:port/service_name.

Check Firewall and Network: Ensure that the necessary ports are open on your firewall and that the server is configured to accept Easy Connect connections.