RegiBoy Lv5Posted 09 Aug 2022 10:09
  
Password reset via USB drive.


1. In the root directory of U Disk, create a blank text file called reset-password.txt ( Directly in the USB)

2. Restart your NGAF after inserting the USB drive into one of the USB ports located near the eth ports on the front of the device.

3. Take remove the USB Drive when the NGAF can ordinarily log on to the Web User Interface.

4. Check the USB drive file reset-password.txt for results, and if the password recovery was successful, write down the new password in the file. (logs in file produced), otherwise the recovery failure information is noted in the log as failed.
Dohan4U Lv2Posted 09 Aug 2022 11:47
  
This is the best option for factory reset the device but make sure to make a backup of the configuration before doing it.

1. Create an empty txt file named reset-password.txt or Copy the reset-password.txt file to the root directory of U Disk;
2. Insert the U disk, restart the device;
3. When the device can normally log on the WebUI, pull out the U disk;
4. See the results of the U disk file reset-password.log,If the recovery is successful, record the restored console password in this file, otherwise the log is recorded the recovery failure information.
jbbertt Lv1Posted 10 Aug 2022 08:56
  
3 Steps

1. Create a text file in the root directory of your flash drive and name it "reset-password.txt"
2. Insert the flash drive into USB port of the device and wait for 10-12 minutes for able the device to reset the password.
3. After 3 minutes remove the flash drive and check if the reset-password.txt file was reset.

- Login using default login credentials.
Faisal P Posted 10 Aug 2022 11:26
  
Use the Console cable (among the accessories) to connect Console interfaces of the two
IAM devices
jsix Lv2Posted 10 Aug 2022 14:39
  
To factory reset the device:
1. Connect ethernet cable to manage (eth0) directly.
2. Download and connect with firmware updater.
3. Press F10, and choose the Restore Factory Defaults.
4. Choose the corresponding update package and restore it.

I Can Help:

Change

Moderator on This Board

11
7
5

Started Topics

Followers

Follow

1
3
5

Started Topics

Followers

Follow

0
4
5

Started Topics

Followers

Follow

67
20
3

Started Topics

Followers

Follow

3
14
3

Started Topics

Followers

Follow

1
137
3

Started Topics

Followers

Follow

Board Leaders