Enrico Vanzetto Lv4Posted 2024-Nov-18 23:39
  
Hi, you can execute easyconnect from cli. You can launch by executing /usr/bin/easyconnect or /usr/sbin/easyconnect (it depends about centos version). Make sure you have sufficent network permissions on your user.
HafidzM25 Lv1Posted 2024-Nov-19 01:25
  
EasyConnect is a VPN client often used to access corporate networks. Here's how to use it on CentOS:  

1. Get EasyConnect:

Download: Obtain the Linux version of EasyConnect from your organization's IT department or the official Sangfor website (if available). It usually comes as a .rpm file.

2. Install EasyConnect:

Open Terminal: Use Ctrl+Alt+T or search for "Terminal" in your applications.
Navigate to Downloads: Use the cd command: cd Downloads (or wherever you saved the file).
Install: Use the rpm command: sudo rpm -ivh easyconnect-*.rpm (replace * with the actual file name).

3. Run EasyConnect:

Command Line: Type easyconnect in the terminal.
Applications Menu: You might find EasyConnect in your applications menu after installation.

4. Connect to VPN:

Enter Credentials: Provide your username and password when prompted.
Connect: Click the "Connect" button or use the appropriate command.
Beru Lv2Posted 2024-Nov-19 11:25
  
You can search for the application in your GUI menu if you are using a desktop environment.
SMHussain Lv1Posted 2024-Nov-19 16:08
  
There is VPN Client for Linux users
CTI Chris Lv2Posted 2024-Nov-19 18:09
  
Can access Easy Connect on CentOS via any kind of web browser.
Muhammad Shiraz Lv2Posted 2024-Nov-19 18:11
  
1. Get the Linux version of Sangfor Easy Connect from your IT department or Sangfor's website.

2. Open the terminal and run these commands to install needed software:
bash
sudo yum install epel-release
sudo yum install glibc.i686 libXext.x86_64 gtk2.x86_64


3. If you downloaded a .tar.gz file, extract it:
bash
tar -xvzf EasyConnect_xxx.tar.gz

Replace EasyConnect_xxx.tar.gz with the actual file name.

4. Go into the extracted folder:
bash
cd EasyConnect


Start Easy Connect:
bash
./easy_connect


5. Enter your server, username, and password in the app and click Connect.
Humayun Ahmed Lv3Posted 2024-Nov-20 14:25
  
Download the EasyConnect installer from the EasyConnect website.
Install the EasyConnect RPM package using the following command:
rpm -i easyconnect-<version>.rpm
Replace <version> with the version of EasyConnect that you downloaded.

Once the EasyConnect RPM package is installed, you need to create a configuration file. The configuration file is located at /etc/easyconnect/easyconnect.conf.

Open the configuration file in a text editor and edit the following settings:

server: The hostname or IP address of the EasyConnect server.
username: Your EasyConnect username.
password: Your EasyConnect password.
Save the configuration file and exit the text editor.

Start the EasyConnect service using the following command:

service easyconnect start
You can now connect to the EasyConnect server using the easyconnect command.
Here is an example of a configuration file:

server = easyconnect.example.com
username = johndoe
password = mypassword
Once you have configured EasyConnect, you can connect to the EasyConnect server using the following command:

easyconnect
This will open a browser window and connect you to the EasyConnect server.
Petal901 Lv1Posted 2024-Nov-20 17:16
  
Download the EasyConnect installer from the EasyConnect website.
Install the EasyConnect RPM package using the following command:
rpm -i easyconnect-<version>.rpm
Replace <version> with the version of EasyConnect that you downloaded.
pmateus Lv3Posted 2024-Nov-20 18:02
  
Download the EasyConnect installer from the EasyConnect website.
Install the EasyConnect RPM package using the following command:
rpm -i easyconnect-<version>.rpm
Replace <version> with the version of EasyConnect that you downloaded.

Once the EasyConnect RPM package is installed, you need to create a configuration file. The configuration file is located at /etc/easyconnect/easyconnect.conf.

Open the configuration file in a text editor and edit the following settings:

server: The hostname or IP address of the EasyConnect server.
username: Your EasyConnect username.
password: Your EasyConnect password.
Save the configuration file and exit the text editor.

Start the EasyConnect service using the following command:

service easyconnect start
You can now connect to the EasyConnect server using the easyconnect command.
Here is an example of a configuration file:

server = easyconnect.example.com
username = johndoe
password = mypassword
Once you have configured EasyConnect, you can connect to the EasyConnect server using the following command:
easyconnect
This will open a browser window and connect you to the EasyConnect server.

Sheikh_Shani Lv2Posted 2024-Nov-21 02:35
  
To access Easy Connect on CentOS, you can follow these steps:

1. First, ensure that the Easy Connect service is installed on your CentOS system. You can check this by running the command:
   systemctl status easy_connect.service

2. If the Easy Connect service is not installed, you can install it using the following command:
   sudo yum install easy_connect

3. Once the Easy Connect service is installed and running, you can access it by opening a web browser and navigating to the Easy Connect web interface using the following URL:
   http://localhost:8443/easy-connect

4. You will be prompted to log in with your credentials to access the Easy Connect interface. Once logged in, you can easily manage your connections and configurations through the user-friendly web interface.

By following these steps, you can easily access the Easy Connect service on CentOS and efficiently manage your connections and configurations.