#Troubleshooting# Fail to run health check for Endpoint Secure
  

Sangfor_52795 Lv1Posted 2024-Oct-09 19:23

Last edited by Sangfor_52795 15 Oct 2024 21:25.

Q1:SangforChecks supports health check versions
All versions


Q2:The Endpoint Secure device cannot be health - checked normally
2.1 Issue Description
1. According to the User Manual, the Endpoint Secure device cannot be health - checked normally.
2.2 Solution
1.  Configure the device according to the following.
a)  Log in to the Endpoint Secure console and go to System > System > Network. On the Advanced tab, select Enable and ensure that the port number is 22345 in the SSH Service section.

b)  On Sangfor Checks, go to Services > Task Settings, select the Single Task tab, and configure the following parameters.
  • Device Type: Select Endpoint Secure.
  • Username: admin or root (for Linux deployment).
  • Console Port: 443
  • SSH Port: 22345
  • Admin Password: Enter the console login password or root user password (for Linux deployment).
  • Scenario Category: Select Specific Function.
  • Scenario: Keep the default selection or select one as needed.
  • Select I have read and accept.

2.  Check whether the port connectivity is normal. (The ports are as shown in the figure)

3.  If Check Connectivity fails, try clicking Start directly. If an error is still prompted, click Continue to continue trying.

4.  If the inspection is still abnormal, please contact tech.support@sangfor.com.

This topic contains more resources

You must log in to download or view the file. Not registered yet? Register

x

Like this topic? Like it or reward the author.

Creating a topic earns you 5 coins. A featured or excellent topic earns you more coins. What is Coin?

Enter your mobile phone number and company name for better service. Go

Enrico Vanzetto Lv4Posted 2024-Oct-10 17:21
  
Hi, thanks for sharing.

Trending Topics

Board Leaders