How to Recovery Password IAM?

khanittha Lv1Posted 25 Dec 2018 16:32

IF I forget to Password IAM.  
How to  recovery password?

Darrel_IAM has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

My apologizes for not noticing the product.
For IAM, you can reset the password follow the steps below:
1. In browser, enter https://IAMIP/php/rp.php and the page will show "File is created. Please plug in crossover cable and restart device."
2. After that, unplug any other cable that connected to IAM.
3. Plug a cable that connect to 2 interface on IAM(such as eth0-eth2,eth1-eth3).
Note that the 2 interface cannot be bypass interface(such as eth0-eth1,eth2,eth3).
4. Restart IAM.
Is this answer helpful?
Darrel_IAM Lv2Posted 25 Dec 2018 17:31
  
My apologizes for not noticing the product.
For IAM, you can reset the password follow the steps below:
1. In browser, enter https://IAMIP/php/rp.php and the page will show "File is created. Please plug in crossover cable and restart device."
2. After that, unplug any other cable that connected to IAM.
3. Plug a cable that connect to 2 interface on IAM(such as eth0-eth2,eth1-eth3).
Note that the 2 interface cannot be bypass interface(such as eth0-eth1,eth2,eth3).
4. Restart IAM.
Muhammad Talha Lv3Posted 25 Dec 2018 17:46
  
Dear Khanittha,

Please note the steps to reset IAM Password below:

1. Access -> https://(IAM_IP )/php/rp.php

** After you access this link, a file will be created and then you will be guided to reset Password of IAM as below:
2. Use cross cable to connect IAM 2 non-Bypass interface.
3. reboot IAM
4. Waiting for 10 minutes
5. Then you can use admin/admin to login

NOTE: PLEASE NOTE THAT STEP "ONE" IS VERY IMPORTANT, IF YOU MISS THIS STEP IAM WILL RESTORE TO FACTORY DEFAULT.

After you access this link you will see instructions as mentioned in picture attached.
Thank you.

Kind Regards,
Muhammad Talha Siddiqui

IAM.png (77.05 KB, Downloads: 1108)

IAM.png
jackADS Lv1Posted 25 Jun 2022 15:31
  

My apologizes for not noticing the product.
For IAM, you can reset the password follow the steps below:
1. In browser, enter https://IAMIP/php/rp.php and the page will show "File is created. Please plug in crossover cable and restart device."
2. After that, unplug any other cable that connected to IAM.
3. Plug a cable that connect to 2 interface on IAM(such as eth0-eth2,eth1-eth3).
Note that the 2 interface cannot be bypass interface(such as eth0-eth1,eth2,eth3).
4. Restart IAM.

I Can Help:

Change

Moderator on This Board

1
3
5

Started Topics

Followers

Follow

Board Leaders