integrated SSL VPN with nComputing RX300

Karolus Thias Lv1Posted 2020-Jul-14 10:13

I am deploying SSL VPN and one of the clients is using RXC 300 nComputing, where nComputing only supports the use of OpenVPN, Open Connect, and PPTP. I tried to use the open connect and PPTP settings but it didn't work. are there any suggestions regarding this matter?

Newbie280530 has solved this question and earned 10 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

"I tried to use the open connect and PPTP settings but it didn't work.", may I know are you enable the PPTP on SSL VPN? If yes but still not working, then you may send in an email to tech.support@sangfor.com for Support Engineer to assist you on this issue.
Is this answer helpful?
Newbie280530 Lv3Posted 2020-Jul-17 09:45
  
"I tried to use the open connect and PPTP settings but it didn't work.", may I know are you enable the PPTP on SSL VPN? If yes but still not working, then you may send in an email to tech.support@sangfor.com for Support Engineer to assist you on this issue.
regidorreyes Lv5Posted 2022-Jul-11 15:43
  
You can check the logs for the possible cause. Also check the side of Ncomputing if there missing settings or need to enable/disable options.
naomivillamor Posted 2022-Jul-11 16:28
  
Review the policy you made in your firewall.
rivsy Lv5Posted 2022-Jul-12 11:41
  
Please check the policy setting if the NComputing is whitelist
Imran Tahir Lv4Posted 2022-Jul-12 20:51
  
Current polich checking
Faisal P Posted 2022-Jul-13 15:06
  
If your firewall support, then move Client VPN tunnel or deploy OpenVPN server
jetjetd Lv5Posted 2022-Jul-13 19:22
  
Last edited by jetjetd 13 Jul 2022 19:24.

Due to security concerns, Sangfor did not include the OpenConnect and PPTP in NGAF. Only supported in Sangfor NGAF is Sangfor's own SANGFOR VPN, IPSEC VPN and SSL VPN.
Rhebie Lv3Posted 2022-Jul-14 08:42
  

Please check the policy settings and logs to better understand what's the problem that is causing the issue.
Pat Lv4Posted 2022-Jul-14 15:08
  
you will not be able to use nComputing thru OpenConnect and PPTP in NGAF since it was not supported by NGAF.

I Can Help:

Change

Board Leaders