Forget password

Faisal Posted 25 Jul 2020 09:50

"How administrators enter the web administrator console for the first time and change the initial administrator password".
What if I forget the administrator password, is there a way to help forget the administrator password?

Sangfor_Yong has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go


Hi Bro,

For VMP, you may reset the password by using USB.

Restore password with USB Drive:
1. Create an empty txt file named reset-password.txt or Copy the reset-password.txt file to the root directory of U Disk;
2. Insert the U disk, restart the device;
3. When the device can normally log on the WebUI, pull out the U disk;
4. See the results of the U disk file reset-password.log,If the recovery is successful, record the restored console password in this file, otherwise the log is recorded the recovery failure information.

Notes:
1.This TXT file can be directly on the windows system to establish a empty TXT file, the file name to reset-password.txt;
2.The txt file must be in the root directory of the U disk;
3.U disk can be single or multiple partitions. A single partition of the U disk format must be FAT32; multi partition U disk must put the txt file in the first partition, and the first partition format must be FAT32.

As for the VDC, the password reset can only be done by technical personnel.
Should you require to reset the VDC password, kindly drop an email to tech.support@sangfor.com
Is this answer helpful?
Sangfor_Yong Lv1Posted 27 Jul 2020 16:13
  

Hi Bro,

For VMP, you may reset the password by using USB.

Restore password with USB Drive:
1. Create an empty txt file named reset-password.txt or Copy the reset-password.txt file to the root directory of U Disk;
2. Insert the U disk, restart the device;
3. When the device can normally log on the WebUI, pull out the U disk;
4. See the results of the U disk file reset-password.log,If the recovery is successful, record the restored console password in this file, otherwise the log is recorded the recovery failure information.

Notes:
1.This TXT file can be directly on the windows system to establish a empty TXT file, the file name to reset-password.txt;
2.The txt file must be in the root directory of the U disk;
3.U disk can be single or multiple partitions. A single partition of the U disk format must be FAT32; multi partition U disk must put the txt file in the first partition, and the first partition format must be FAT32.

As for the VDC, the password reset can only be done by technical personnel.
Should you require to reset the VDC password, kindly drop an email to tech.support@sangfor.com
Faisal Posted 09 Oct 2021 21:18
  
Thank you very much for the information ...
Ahmed444 Lv1Posted 12 Aug 2022 15:16
  

Thank you so much for this information.

I Can Help:

Change

Board Leaders