WANO Reduction

Caesar Lv1Posted 2018-Aug-16 19:28

Hii all,

I have WAN Optimizer from Head Office to every Branch, each brach has same behavior and application, but there is has low reduction persentage  and high reduction persentage optimation. What makes a reduction different each branch?

aafreenbutt has solved this question and earned 20 coins.

Posting a reply earns you 2 coins. An accepted reply earns you 20 coins and another 10 coins for replying within 10 minutes. (Expired) What is Coin?

Enter your mobile phone number and company name for better service. Go

you can also read this thread to understand your issue http://community.sangfor.com/forum.php?mod=viewthread&tid=435
Is this answer helpful?
CTI LS Lv3Posted 2018-Aug-17 10:28
  
Hi,

The reason could be vary, it needs to view the traffic that flow through both device.
aafreenbutt Lv1Posted 2018-Aug-20 17:42
  
Last edited by aafreenbutt 20 Aug 2018 23:27.

Go to navigation area > Wan Optimization > Byte cache and check If Maximize Data Reduction is selected, bandwidth savings will be maximized but throughput of
the WAN Optimization Controller (WOC) will be lowered down.
If Maximize LAN  Throughput is selected,  throughput of the WOC  will be maximized but  data
reduction capability will be affected.
MChalidA Lv1Posted 2019-Aug-16 12:14
  
wow this is help full bro
Hehe Lv1Posted 2020-Nov-25 10:51
  
Wow! What a helpful thread!
Ellechar Lv4Posted 2021-Jan-08 10:53
  
Very Nice Information
Saifur Lv3Posted 2021-Jul-04 00:44
  
Helpful information, thanks

I Can Help:

Change

Board Leaders